Re: {Chrysler 300} Cross Ram part( vacuum anti stall device)
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: {Chrysler 300} Cross Ram part( vacuum anti stall device)



These are very similar if not identical (piston part of it ) to those used on 4 speed mopar —- like road runner , cuda etc around 69-70 as anti stall devices , —-but the mount is different . They are being reproduced for those . 
Some careful rework of the mount foot would seem to get you a functional device , although I have not done that .
 With AC this function probably gets pretty important as compressor load comes and goes . 
One BIG heads up , if you grab the nut or screw and start “ adjusting “ it , it has no resistance to twisting torque inside the device  and you immediately tear the fragile diaphram , destroying it . You MUST hold the flat on the shaft with a wrench and carefully keep from any twisting it . ( two wrenches ) 
That is why they are all no good . I did that too long ago . So it may not be the device —-even a new one —- that is “ bad” it is how it was installed .. or adjustment attempted 
John 
Sent from my iPhone

On Jun 7, 2022, at 6:18 AM, Allan Klotz <allan.klotz@xxxxxxxxxxxxxxx> wrote:



Hi

 

To all that answered my e-mail about this subject, thank you very much for your assistance.

 

Thanks

Allan

 

From: 'Randy Guyer' via Chrysler 300 Club International [mailto:chrysler-300-club-international@xxxxxxxxxxxxxxxx]
Sent: 6. juni 2022 20:53
To: finsruskw@xxxxxxxxxxxxxxx; 'Allan Klotz'; 'Chrysler list server'
Subject: RE: {Chrysler 300} Cross Ram part

 

I’ve bought a couple from Jeff Carter through the years with good luck.

JC Auto https://jcauto.com/

 

 

From: chrysler-300-club-international@xxxxxxxxxxxxxxxx <chrysler-300-club-international@xxxxxxxxxxxxxxxx> On Behalf Of finsruskw@xxxxxxxxxxxxxxx
Sent: Monday, June 6, 2022 1:14 PM
To: 'Allan Klotz' <allan.klotz@xxxxxxxxxxxxxxx>; 'Chrysler list server' <chrysler-300-club-international@xxxxxxxxxxxxxxxx>
Subject: RE: {Chrysler 300} Cross Ram part

 

Anti stall pot.

Been NSI for like forever.

Any you find now that are NOS will most likely LEAK and not function properly.

Ask me how I know this and vendors WILL not test or warranty them!!

Buyer Beware.

 

From: chrysler-300-club-international@xxxxxxxxxxxxxxxx <chrysler-300-club-international@xxxxxxxxxxxxxxxx> On Behalf Of Allan Klotz
Sent: Monday, June 6, 2022 1:01 PM
To: 'Chrysler list server' <chrysler-300-club-international@xxxxxxxxxxxxxxxx>
Subject: {Chrysler 300} Cross Ram part

 

Hi

 

Anyone who has the round silver part on the photo for sale or know where I can get one?

 

Thanks

Allan

 

 

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/629e40ee.1c69fb81.e527c.c848SMTPIN_ADDED_BROKEN%40gmr-mx.google.com.

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/011a01d879d1%2429395aa0%247bac0fe0%24%40iowatelecom.net.

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/014401d879d6%24af72acc0%240e580640%24%40icloud.com.

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/629f25de.1c69fb81.aaa3.68a4SMTPIN_ADDED_BROKEN%40gmr-mx.google.com.

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/C4C7FBEB-7C46-41B3-B481-FDA06AF45AFB%40gradyresearch.com.


Home Back to the Home of the Forward Look Network Archive Sitemap


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.