I have only had my 300 E for three months or so…it takes quite some timeto get the gas going into the carbs…I have 2 four barrel carbs which takes foreverto become full of gas so it will start.I am seeking advice on the best procedure in starting to speed up the process.I pump the gas pedal three or four times before I start cranking the starter…is it better to pump while cranking or before. Any advice would be appreciated.Yes once it has run for a while it starts right up easily.ThanksRob Lutts from Salem Massachusetts--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/2fba117a-e4e0-44b9-9d6f-4243dd251e15n%40googlegroups.com.