Re: {Chrysler 300} Pot Metal

[Kurt Brueske <kurt.brueske@xxxxxxxxx>]

Hi Ron -

I’ve had work done over the years by Iverson Automotive - very happy with their work:

https://www.iversonautomotive.com/

Kurt 

On Sat, Apr 2, 2022 at 7:16 AM Ron Kurtz <mark6268@xxxxxxxxxxxxx> wrote:

Hello, everyone:

Need some pot metal repair and chroming done on the backup light housings. I saw a few suppliers in the club's Sources list and would like to know if anyone has recommendations as to service and quality. Thanks.

Best,

Ron Kurtz

E #292

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/913053288.758996.1648901775022%40mail.yahoo.com.

-- 
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
--- 
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/CANpbhiZZSgAbjuH4e0eWWqaTqSNB849Jbvrvz8Ss4aTiVaK5jw%40mail.gmail.com.