{Chrysler 300} Re: re main seal
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

{Chrysler 300} Re: re main seal



Fern, the 4 little side seals on the rear main bridge that you bought from Mancini swell when exposed to oil. So be care full when you install it. I had to buy another side seal kit as I could not get the bridge in after they had swelled due to contact with assembly lube that I put on the seal face.. I also offset my rear main seal slightly so the parting line of the Felpro seal was not in line with the plane of the block. 

On Thursday, March 17, 2022 at 3:38:57 PM UTC-4 Fern wrote:
I found a source for rear main seal retainer for RB 413 engine from Mancini Racing.
Cheers from Fern


Virus-free. www.avg.com

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/efddabb9-afe6-40d0-bdc5-7fc2d1e756d3n%40googlegroups.com.


Home Back to the Home of the Forward Look Network Archive Sitemap


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.