Re: {Chrysler 300} 300G 2 pot master cylinder upgrade.

dave & Kya

Sent from my iPhone

On Feb 7, 2022, at 1:12 PM, John Grady <jkg@xxxxxxxxxxxxxxxxx> wrote:

hi
Sort of partial recollection of past experiences with this :
you often cannot get cover off large dual mopar masters of late 60’s no room for the bail handle either . had to make a flat cover of Al plate with tabs held on by muffler style U bolt under master .
Dodge dart fit too but very small reservoir .
Never did understand that reservoir size aspect , why is small ok on dart ?
Specifically as best I can remember there is a police dodge drum / drum master about 68 ? large one , but correct valving and bore for 4 large drums .
may have to put mechanical brake switch .
hope it helps a bit ..
john

Sent from my iPhone not by choice

On 7 Feb 2022, at 1:01 pm, dplotkin <dplotkin@xxxxxxxxxxxxxxxxxxx> wrote:

I'm sorry I thought this 300g was going to have disc brakes in front. If it's all manual the advice you've been given is good any flat top Master for a 68 Chrysler New Yorker for example will do the job. I use that under the booster of my 61 Savoy which has a ram setup

Sent from my Verizon, Samsung Galaxy smartphone

-------- Original message --------
From: Bob Jasinski <rpjasin@xxxxxxxxxxx>
Date: 2/7/22 12:42 PM (GMT-05:00)
To: 'Chrysler 300 Club International' <chrysler-300-club-international@xxxxxxxxxxxxxxxx>
Subject: {Chrysler 300} 300G 2 pot master cylinder upgrade.

I was contacted a couple days ago from a shop doing work on a 300G. The shop tech explained that the owner has requested a dual circuit, 2 pot master cylinder be installed with the required additional brake lines, and he wanted to know what master cylinder would fit. I told him I wasn’t aware of any drum/drum master cylinder upgrades but did tell him that some have done disc/drum upgrades that included a change to a 2 pot disc/drum type master cylinder. Has anyone done a drum/drum 2 pot master cylinder upgrade? What master cylinder was used?

Bob J

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/017001d81c49%24f8412980%24e8c37c80%24%40comcast.net.

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/62015e72.1c69fb81.921cf.e232SMTPIN_ADDED_MISSING%40gmr-mx.google.com.

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/F95DB30C-B7AB-45EF-8D2F-927BD1AB491E%40gradyresearch.com.