Re: {Chrysler 300} Transmission fluid recommendation for cast iron torqueflite

["D.C. Mason" <petergriffinforpresident@xxxxxxxxx>]

Have also heard that DexVI is better in the later TF (62-65?) than Dex/Merc III.  Not sure why, maybe Don knows if true…

I believe Type F replaced Type A.  

V/r,

dave

Sent from my iPhone

On Jan 20, 2022, at 12:53 AM, Nick Taylor <nicksgaragesd@xxxxxxxxx> wrote:

For my 1960 the service information says to use Type A but George Riehl's 2002 article says to use Type F. What is the current recommendation?

Also, would that be the same for a 1957?

Thanks, Nick

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/d99003a6-924a-4687-ac38-f395490f3091n%40googlegroups.com.

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/8EE0CBE0-0581-4415-B5EE-8429F760D948%40gmail.com.