Re: {Chrysler 300} Oil Breather Unit
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: {Chrysler 300} Oil Breather Unit



if I understand you correctly it is the normal pcv taking air for pcv from inside the main air cleaner mesh ( so air is very clean) and admitting it to the engine? sometimes blow by is sufficient to overcome the pcv and blow oil backwards ( pcv  is not pulling air anyway due to no vacuum if your foot is in it ) and thus get the inlet  fitting oil soaked , sometimes inside the air cleaner too .
All that is kinda normal if ugly looking and the oil and air are clean . Pcv normal flow is very low it is not restricted by this . 
I’d leave it alone unless damaged or something ? A new one will be the same within weeks. 
That  said and not sure it fits but I have a 78 dodge 318 pickup doing the same thing . Don’t like it — but way it is .  Some fittings push into a rubber grommet and some have a 1/4 turn lock like an  oil fill .   I believe mopar performance sells them for its own valve cover line but may not fit ,—  but must be common in junkyard ( Murray Park?) 

All production used this some  thing years after california ? I wonder what year the pvc started ?

A good thing , prevents sludge build up inside by pulling junk out . . Hot heads sells a kit to put pcv on 392 on the valley pan where the draft tube goes , I have used those on several cars at rebuild 
Good luck !

 jkg 

Sent from my iPhone not by choice 

On 7 Jan 2022, at 8:19 pm, Ronald Klinczar <rjklinczar@xxxxxxxxx> wrote:

Hey folks,
My 1965 Chrysler 300 originates from South San Fransisco, CA.  As a result, it has a connecting hose from the air cleaner to the valve cover breather element, and the element has a nub to attach.   I cannot find this breather with the nub marketed.  While I have soaked the breather element in cleaner, I am concerned about how well it is working.  Any ideas or known manufacturers for this element?

Ron Klinczar
1965 Chrysler 300 in Ice Blue

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/CAHAPk3VEX2KCKEWWScumPdaRmenskP5nO-N%2BakNmLSF3CSTevQ%40mail.gmail.com.

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/68B24592-9CB3-4E9D-8C6A-E42714C69103%40gradyresearch.com.


Home Back to the Home of the Forward Look Network Archive Sitemap


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.