RE: {Chrysler 300} 300F Suspension Parts
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
RE: {Chrysler 300} 300F Suspension Parts
- From: "Ron Waters" <ronbo97@xxxxxxxxxxx>
- Date: Thu, 30 Dec 2021 23:26:16 -0500
Avoid Kanter. Overpriced Chinese junk. Start with NAPA. Then try Andy
Bernbaum. Also consider Rare Parts Co. if you are doing tie rods, center link
etc. They offer a rebuilding service, which I was pleased
with.
Ron
Am excited to announce that I have finally started restoration on my
300F after way too many years of it sitting in the garage. Car was
transported to shop and is totally stripped down for full on rotisserie
restoration. Wanted to get groups opinion and where to source suspension
parts first off. Am especially interested in thoughts on Kanter for source
of all the suspension renewables.
Tried to post some pictures with this but kept getting errors about being
too long. What are the restrictions/rules for posting too?
--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/76FA7DF1645641E9AB260A42ED025853%40ThinkPadL520.
Back to the Home of the Forward Look Network
Archive Sitemap