Re: {Chrysler 300} Kit for Electronic Ignition Conversion 1961 Chrysler 300G

[Lars Kirschke <lars.kirschke@xxxxxxxx>]

Hello,

totally support Rays view. Had and have Pertronix installed in several cars (30s-60s) and they work flawless. You can use original distributor, no hidden boxes, easy to install. Just follow the rules of low resistance coil, bridging the ballast resistor and correct wires and you’re done for years…

Good luck

Am 01.12.2021 um 07:03 schrieb Ray Melton <rfmelton@xxxxxxx>:



Several years ago I bought the Pertronix Ignitor unit for my 1957 300C from Club member John Lazenby.  I separately bought the Pertronix 40 kV coil (painted black and with homemade lettering to duplicate the original), custom-made 7 mm RFI-suppressed resistor ignition wires (virtually mandated by Pertronix) and modern fine-wire NGK iridium resistor spark plugs.  I also filled in the backside of the factory ballast resistor to provide constant 12V to the distributor as required by Pertronix.  I am SO HAPPY to never have to deal with those cursed dual points buried against the firewall ever again!  And the car now starts within barely half a second after priming the carburetors!  I absolutely love it!   There is nothing to hide (it's all inside the distributor) and everything looks perfectly stock for the most persnickety concours judges!

Ray Melton   Las Cruces, NM  1957 Chrysler 300C cvt   White/Gauguin  s/n 3N572517

************************************************************************************************

On 11/30/2021 6:15 PM, dplotkin@xxxxxxxxxxxxxxxxxxx wrote:

Can't help on the mechanical tach but this system will do:

 

https://www.summitracing.com/parts/pro-440-426

 

You can hide the box under the rad support. See attached photo of my 61 Savoy with this setup.

 

Danny Plotkin

 

-----Original Message-----
From: "angad22" <angad22@xxxxxxxxx>
Sent: Tuesday, November 30, 2021 6:54pm
To: "Chrysler 300 Club International" <chrysler-300-club-international@xxxxxxxxxxxxxxxx>
Subject: {Chrysler 300} Kit for Electronic Ignition Conversion 1961 Chrysler 300G

Hi Friends,

I am looking for an electronic ignition conversion kit for a Chrysler 300G. My 64 300K has a kit that was purchased from Summit racing, part number PNX - 1382 which is no longer available. 

Summit recommends PerTronix 1385LS - PerTronix Ignitor Lobe Sensor Solid-State Igntion Systems. Anyone installed this on their car or know of any other kits available for this conversion?

Thanks,

Angad

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/f0ec01ac-9c40-4d8f-a372-4ad8dc0f3bdfn%40googlegroups.com.

 

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/1638321324.497825281%40apps.rackspace.com.

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/DM5PR0701MB365307A36E37896AF858F8F5C0689%40DM5PR0701MB3653.namprd07.prod.outlook.com.

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/04C82BE2-EA06-49E9-B4CB-8A6083A1A511%40gate7.de.