Re: {Chrysler 300} windshield gasket/seal for G

Bob Haag

On Oct 4, 2021, at 1:38 PM, Nick Taylor <nicksgaragesd@xxxxxxxxx> wrote:

Pretty much your only source is a used gasket. Check with John Fowlie at Big M in Williams, CA.

On Mon, Oct 4, 2021 at 9:36 AM JACK DEMAR <oldwoodboat@xxxxxxxxxxx> wrote:

Hello all, I am in need of a new windshield gasket for the G after a lot of google searches and conversations with suppliers I haven't been able to find a source, only some generic extrusions. Is anyone making a proper loop gasket? Quirey indicated he is working on trying to get a source but it's a longer term project. THANKS for any guidance or information. Kind regards/Jack DeMar

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/1270871410.62237.1633365378500%40connect.xfinity.com.

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/CA%2BjApFNGm7a3Pw2QB8xjkp_JAe3nfVYZW67wF5x2P3i%2BoaL5qQ%40mail.gmail.com.