Re: {Chrysler 300} Crossram linkage

[Bob Merritt <bob@xxxxxxxxxxxxx>]

This might save you the trouble --
Jean-Yves has the linkage available, see

http://www.chrysler300club.com/rcmstuff/jy/ramparts.html




On 9/7/2021 7:55 AM, 'bill grieve' via Chrysler 300 Club International wrote:

Hi. I'm going to make the throttle linkage for my crossram manifolds. Can someone furnish the length of the top and bottom bars and the length of the 3/8 rod that they are attached to?  I would appreciate any help you can give me. Thanks in advance. Bill G.

Sent from Yahoo Mail on Android

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/343331079.1649787.1631015743292%40mail.yahoo.com.

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/61375D28.1060007%40simplexco.com.