Re: {Chrysler 300} F and G Long Ram spark plug wire recommendation?

["'Keith Langendorfer' via Chrysler 300 Club International" <chrysler-300-club-international@xxxxxxxxxxxxxxxx>]

Thanks for the quick replies, Noel and Mark ! 

> On Jul 29, 2021, at 11:13 PM, Noel Hastalis <cpaviper@xxxxxxxxxxx> wrote:
> 
> Hi Keith,
> I just happened to have picked up a new set of wires yesterday from Lectric Limited. Cost $75 + tax. I didn’t need shipping, since they’re near me. 
> The wire lengths are excellent- cut to size. Also, the #3 wire has the correct 135 degree angle plug boot. 2nd attached photo is of the sheet provided with the wires. 
> I’ve had a bit of an issue in the past separating some of boots from the plugs, so bought a new set to install next week when I replace my F plugs. Dielectric grease is included with the wires. 
> This is the source Gil Cunningham had recommended on our Club’s site several years ago.  
> Noel 
> 
> -- 
> For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
> --- 
> You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
> To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
> To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/DF91DA77-F925-4E6D-9E19-18B4355C63C0%40comcast.net.
> <image.jpg>
> 
> 
> -- 
> For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
> --- 
> You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
> To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
> To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/DF91DA77-F925-4E6D-9E19-18B4355C63C0%40comcast.net.
> <image.jpg>
> 
> 
> Sent from my iPhone
> 
>> On Jul 29, 2021, at 9:29 PM, 'Keith Langendorfer' via Chrysler 300 Club International <chrysler-300-club-international@xxxxxxxxxxxxxxxx> wrote:
>> 
>> Hi Folks
>> 
>> Any suggestions on a pre cut ignition wire set that you were happy with? 
>> 
>> Thanks in advance, 
>> 
>> Keith 
>> 
>> -- 
>> For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
>> --- 
>> You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
>> To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
>> To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/F540C81E-7663-47DB-81AF-C652925EE0E7%40yahoo.com.
> 
> -- 
> For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
> --- 
> You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
> To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
> To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/DF91DA77-F925-4E6D-9E19-18B4355C63C0%40comcast.net.

-- 
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
--- 
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/E149A408-D4FB-4F7B-ABE1-DEA7368B1230%40yahoo.com.