| Hello All, Question…. Have my Astradome that JC Auto went through, but many years ago; like 20-25 years ago. The car had sat for about 10 years, before I got it back up & running. Anyway…. Brand new 383 & a brand new aluminum radiator, water pump, thermostat, etc. Everything under the hood is new. The Oil Pressure AND Water Temp gauges seem to be running HIGHER than they should be. - Oil Pressure gauge = basically pegged at high all the time - Temp gauge = above mid-way; more towards hot; but a laser pointer thermometer at the radiator reads 165 degrees. And so…. I brought a test light out. - Grounded it - Put the light pointer on to the top of the temp sending unit - Clicked on the ignition switch - The test lamp flashes; reflecting that the Oil Pressure gauge voltage limiter switch is OK (I thought that might be why those 2 gauges were reading higher than they used to, before I parked the car; after killing the 413 I had in it!) Any further thoughts or tests I should run? Thanks!
-- For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang --- You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group. To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx. To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/1725F884-939B-4DF7-A5F0-AE33EB66C919%40yahoo.com. |
Back to the Home of the Forward Look Network
Archive Sitemap