Re: {Chrysler 300} Fender dilemma

["'Val Jeffers' via Chrysler 300 Club International" <chrysler-300-club-international@xxxxxxxxxxxxxxxx>]

Of course the pentastar was only supposed to be on the passenger side 


Sent from Yahoo Mail for iPhone

On Tuesday, June 22, 2021, 10:18 AM, 'Dave Dumais' via Chrysler 300 Club International <chrysler-300-club-international@xxxxxxxxxxxxxxxx> wrote:

To all, 

Being 3rd owner of my 64 K, it had dual pentastar on both driver and passenger fenders.

I found the factory drilled holes on the drivers side.

The car is freshly painted. No way I can plug those holes and record the fender.

Has anyone ever come across this situation. 

Should I install the star to cover these holes?

Could it be a mistake from assembly line?

Dave

Sent from Yahoo Mail on Android

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/773383210.1475817.1624371501720%40mail.yahoo.com.

-- 
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
--- 
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/1784252303.3531044.1624375608032%40mail.yahoo.com.