Re: {Chrysler 300} 300F rear glass moulding

From: Val Jeffers <edward1108@xxxxxxxxx>
Sent: June 1, 2021 11:53 PM
To: Jean-Yves Chouinard <jymopar@xxxxxxxxxxx>; chrysler-300-club-international@xxxxxxxxxxxxxxxx <chrysler-300-club-international@xxxxxxxxxxxxxxxx>
Subject: Re: {Chrysler 300} 300F rear glass moulding

Just to advise SO stands for the Sales Order number which were on carbonized forms in chronological order supplied in bulk to Dealers then embossed on the data plate of the car ordered.

Thanks

Sent from Yahoo Mail for iPhone

On Tuesday, June 1, 2021, 7:17 PM, Jean-Yves Chouinard <jymopar@xxxxxxxxxxx> wrote:

I had a few replies to my question about rear glass moulding upper section. Tickled my curiosity...so if anybody out there wants to share with me their SO number and type of rear upper trim on their cars, (one small middle joint or three small joints spread across the top), please do so.

SO # is on the body code plate (not the VIN), located on the upper end of the driver side door post...open the door fully to see the plate, the first four digits is a date code for a possible built or shipping date...

In my spare time, I will make a compilation of the built date and type of trim present and share my findings later with the group.

Nothing scientific here...just wondering if there's a pattern in there with built date...

Thanks!

Jean-Yves Chouinard

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/BN7PR06MB6419AEE5E4FAEB148254F394AE3E9%40BN7PR06MB6419.namprd06.prod.outlook.com.