{Chrysler 300} Reproduction inner fender close out panels for 60-61 Ram Cars

["'John Lazenby' via Chrysler 300 Club International" <chrysler-300-club-international@xxxxxxxxxxxxxxxx>]

I received a post from my friend Brad Brody regarding to topic.  Brad is not a member of the club but wants to know if there is interest in doing this project.  He has fiberglass molds to make them and is ready to get a price to produce but I guess that will be determined by units he can sell.

You can respond to me and or Brad directly who is CC on this post.

John Lazenby

-- 
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
--- 
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/718106953.1217501.1622215575668%40mail.yahoo.com.