I’m probably “preaching to the choir” here, but setting up the ram manifold linkage and carbs to run well relies on following the procedure outlined in the factory service manual. Once done, if problems persist, start looking at individual components for the culprit. Bob J From: chrysler-300-club-international@xxxxxxxxxxxxxxxx <chrysler-300-club-international@xxxxxxxxxxxxxxxx> On Behalf Of Tim He all, I have a 300G and it starts fine, but really really runs rough for the first 3-4 minutes; rough running, kills, wont hold idle; a little surging….then seems to plane out and be fine. Im not a real gear head (lol) but maybe send me and my mechanic down the right diagnostic path? Thanks Tim -- For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang --- You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group. To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx. To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/03f801d741d4%242c3daa70%2484b8ff50%24%40comcast.net. |
Back to the Home of the Forward Look Network
Archive Sitemap