{Chrysler 300} 64 trunk gaps and such

["'Dave Dumais' via Chrysler 300 Club International" <chrysler-300-club-international@xxxxxxxxxxxxxxxx>]

Hello again,

Now that both trunk hinges are secured to torsion bar ends, the side gaps still persist.  The trunk upper corners are fitted flush.

The driver side gap ( fore and aft) is wider than the passenger side, and the pass rear corner needs to be brought down.

I did adjust striker plate many times, and moved latch back to original position.

every edge is taped to prevent paint damage.

I read the section in  chapter 23 several time for adjustments.

thanks Guys.

Dave

-- 
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
--- 
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/903719169.997172.1618355281847%40mail.yahoo.com.