Re: {Chrysler 300} 1961 Chrysler rear stainless trim repro

[Angad Singh <angad22@xxxxxxxxx>]

Hi Noel,

I would like to confirm if it’s the same trim shown in the picture attached.

If so I would like to order one.

Thanks,

Angad

On Wed, Apr 7, 2021 at 11:23 AM Noel Hastalis <cpaviper@xxxxxxxxxxx> wrote:

Looks like the long thin horizontal stainless trim piece that mounts just below the trunk of ‘61 Chryslers will soon be reproduced in Sweden.

To get a feel for demand for this piece, let me know if you’re interested, and for how many.

Noel

Sent from my iPhone

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/DC469A0C-9C5C-4D90-B0C3-A83386051160%40comcast.net.

-- 
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
--- 
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/CAG6wEhhVtfBTXCab1Oz8vfsqXsLKTb3KrbqFPd5EUj7j%2BNcdjw%40mail.gmail.com.