Hi, Harry: The outside RH rear view mirror on our ’64 300K rag has crossed flat-blade screwdriver slots in the nose of the front leading part of the mirror attachment. Use the largest bladed screwdriver you have. A Phillips screwdriver will not work. The screwdriver slots are shallow and may be hidden or encrusted but they should be there. Rich B. From: chrysler-300-club-international@xxxxxxxxxxxxxxxx <chrysler-300-club-international@xxxxxxxxxxxxxxxx> On Behalf Of torg66 Hi group, does anyone know how to loosen the rearview mirror at the ball adjuster, non motorized and on the fender. Thank You Harry Torgeson 971-221-4699 -- For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang --- You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group. To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx. To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/030801d72b41%24134979d0%2439dc6d70%24%40ez2.net. |