{Chrysler 300} 1962 300 Sport - Linkage Adjustment

["'Matt Allyn' via Chrysler 300 Club International" <chrysler-300-club-international@xxxxxxxxxxxxxxxx>]

Working on my ’62 Sport.
383 with a single 4 barrel.
New everything; engine, carburetor, transmission; even the shifter cable.
All linkage taken apart, cleaned all threads of adjustment areas & reassembled.
I have done the adjustments, very meticulously, per Group 14 in the service manual.

Now….
- It shifts from 1st to 2nd a bit late.  RPM’s up too high before shifting hard into 2nd (fine if drag racing, but not cool for the street).
- It doesn’t want to shift up into 3rd at all.

Helpful hints as to which steps, of 1 through 8 to readjust; or slightly change up a bit from the book?
Or start over & go step by step all over again?

Thanks!
Matt Allyn

-- 
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/69FDE1F5-CF1B-42E8-A5AD-66C283FDF5B3%40yahoo.com.