Re: {Chrysler 300} Speedo Cable

["'Matt Allyn' via Chrysler 300 Club International" <chrysler-300-club-international@xxxxxxxxxxxxxxxx>]

I tried that.

It had slid down towards the transmission side of things.

I will have to pop it out of the trans & capture the fluid.

Yay; nothing has been easy on brining THIS car back to life…..nothing.

Oh well.

Thanks!

On Dec 23, 2020, at 7:23 PM, Loren Nelson <lorenhelenn@xxxxxxxxx> wrote:

Have you tried to reach the cable with a thin long nose pliers? The end should be very close to the end of the cable housing. If it is not there it may be too short for the old tip to reach the speedometer when refastened to the cable. 

--
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/CANvhwYZ%2BU0NJfUJUD5e-dv9evK0BSRfENE5afKDKM51PpH%3DYNw%40mail.gmail.com.

--
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/2FECEE91-4866-4E06-9E39-9E1B6B048D5A%40yahoo.com.