Re: {Chrysler 300} 1962 Cab. Linkage Adjustment

[Cox <scooter465@xxxxxxx>]

Hi

So as long as throttle blades

Are fully opened with pedal

On the floor. And the pedal

Height is comfortable to

You that's all their is to it.

Bob Haag

On Nov 8, 2020, at 12:56 PM, 'Matt Allyn' via Chrysler 300 Club International <chrysler-300-club-international@xxxxxxxxxxxxxxxx> wrote:



Trying to accurately adjust all of the linkage for the 4 barrel on my 383 for this 300 Sport.

I am good at following directions, accurately, but need advice on one step:

In the Service Manual....

http://www.jholst.net/62-service-manual/fuel.pdf

Group 14....

Page 14-43....

Step 5....

Anyone have a way they execute this measurement....?

DISCONNECT ONE END OF THE ACCELERATOR PEDAL ROD © .

ADJUST ITS LENGTH TO PROVIDE A PEDAL ANGLE OF 113° TO 115

I don't have a protractor and was always bad at math.

Thanks!

Matt Allyn

--
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/658490956.3077870.1604858180326%40mail.yahoo.com.

--
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/F47D926A-6EF8-48D6-BAE0-098BEB32EFEC%40cox.net.