Hi Noel,
Like Bob said, you need to downsize your pictures. That said, all 1960
413’s to my knowledge had a P before the 41. Yours could be under the valley pan
bar. They didn’t start stamping HP until 61.
Don
From: Noel Hastalis
Sent: Monday, November 02, 2020 10:36 AM
Subject: Re: {Chrysler 300} Engine Decode (with a
Picture!?) Hi
Don,
I could be wrong, but I thought I had read somewhere that not all F 413s
were stamped with a “P”.
Here’s my F motor stamping, with May 3 date code. Scheduled build date was
May 5, so this date coding appears correct. I’ve always thought the 413 in my F
was original to the car, but maybe I’m wrong?
Your thoughts?
Noel
Sent from my iPhone
On Nov 2, 2020, at 9:23 AM, dverity via Chrysler 300 Club International <chrysler-300-club-international@xxxxxxxxxxxxxxxx> wrote:
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group. To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx. To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/0592B050-9420-4C4C-8552-1912BF4748FF%40comcast.net. You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group. To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx. To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/5A289FF985FC4F91A645B0A166EE4EEC%40OwnerPC. |