Re: [Chrysler300] Alignment question
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Chrysler300] Alignment question





Found this in an old email

Here is what I have from my archives:
For everyone that missed this:
1957-61 CHRYSLER 300-C to 300-G
Alignment Data & Specifications
Camber
Left ............................. +1/4 degree, +/- 1/4 degree
Right ........................... 0 degree to + 1/4 degree
Preferred .................... Left: +3/8 degree, Right: 0 degree
Left 1/4 degree to 1/2 degree algebraically greater than right

Caster
Left ............................ + 2 1/4 degrees Right ......................... + 2 1/2 degrees

Toe-in ............................ 1/8”
300'ly, Gary Hagy

On 10/06/2020 10:44 AM Gloria Moon agmoon300@xxxxxxxxx [Chrysler300] <chrysler300-noreply@xxxxxxxxxxxxxxx> wrote:


 


Hi All.

Anybody know know these Specs. or exactly where to find them for RADIAL
TIRES, caster, camber and toe.

Thanks.

Allan - agmoon@xxxxxxxxx




__._,_.___

Posted by: JIM KRAUSMANN <kraus300@xxxxxxxxxxx>


To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to https://groups.yahoo.com/neo/groups/all/manage/edit

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang




Visit Your Group
Yahoo! Groups
PrivacyUnsubscribeTerms of Use

__,_._,___


Home Back to the Home of the Forward Look Network Archive Sitemap


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.