|
I have 57c carbs. 6-1310 is correct casting no. for air horn
on both carbs. The non chock is not drilled for chock shaft. 6-1230 may be for
58? I have never seen AFB on a 57c. Send photo and I can help
identify.
Gary
Sent: Saturday, September 19, 2020 11:49 AM
Subject: RE: [Chrysler300] 1957 carbs and intake manifold info
needed
Are the air cleaners included as well ? A used set usually goes for
1000+.
Ron
From: Chrysler300@xxxxxxxxxxxxxxx [mailto:Chrysler300@xxxxxxxxxxxxxxx] On Behalf Of Jim Jungwirth jk-jungw@xxxxxxxxxxx [Chrysler300] Sent: Saturday, September 19, 2020 2:05 PM To: Chrysler300@xxxxxxxxxxxxxxx Subject: [Chrysler300] 1957 carbs and intake manifold info needed Hello
all,
Got
a chance to buy a complete 2X4 setup for a '57. 2 carbs, manifold, throttle
linkage. The manifold is P/N 1733477, I think that's correct. Were all the carbs
used WCFB'S? I read somewhere some AFB's were used. He's giving me numbers
6-1310, which may be the rear, and 6-1230, which I can't find any info about.
Wondering
where to find the correct part numbers on the carbs and what the value of the
setup would be. Carbs need rebuilding.
I
don't need this for myself, just looks like a good deal.
Thanks
in advance for any help.
Jim
Jungwirth
__._,_.___ Posted by: "Gary Nelson" <gnelson@xxxxxxxxxxxx> To send a message to this group, send an email to: Chrysler300@xxxxxxxxxxxxxxx To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or go to https://groups.yahoo.com/neo/groups/all/manage/edit For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang __,_._,___ |
Back to the Home of the Forward Look Network
Archive Sitemap