Re: [Chrysler300] Thompson Power Steering Pump
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Chrysler300] Thompson Power Steering Pump






I would recommend installing a power steering fluid cooler which is what I did on my C after experiencing the original to burn out from the heat of the driver’s side exhaust manifold being in close proximity. I had a 2001 GMC 4 wheel drive transmission cooler installed in front of the driver side of the radiator yoke beneath the horns and routed the power steering hoses to it.  The pump has lasted so far 15 years since being rebuilt by Jeff Carter.  300’ly, Rob Kern

Sent from my iPad

On Sep 4, 2020, at 1:13 PM, Noel Hastalis cpaviper@xxxxxxxxxxx [Chrysler300] <Chrysler300-noreply@xxxxxxxxxxxxxxx> wrote:

  

Our 300 Club member, Frank Troost, also has a ‘57 NYer convertible that has a Thompson p/s pump. He’s had a couple bad ones - and is asking if there’s a work-around to use a different setup than the Thompson. He’s just installed yet another rebuilt one, so we’ll see if this one holds up.
This ‘57 is an a/c car.

Noel

Sent from my iPhone



__._,_.___

Posted by: Rob Kern <robkern@xxxxxxxxxxxxx>


To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to https://groups.yahoo.com/neo/groups/all/manage/edit

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang





__,_._,___


Home Back to the Home of the Forward Look Network Archive Sitemap


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.