Speaking of the short cross rams. If memory serves me correctly the short cross rams were dealer installed ? Thanks Val
Sent from Yahoo Mail for iPhone
On Saturday, August 29, 2020, 4:10 PM, 'Jerry Lindsay' jerrylindsay300h@xxxxxxxxxxxxxxx [Chrysler300] <Chrysler300-noreply@xxxxxxxxxxxxxxx> wrote:
In 1962 Hot Rod magazine ran a 1962 300 coupe with cross rams and beat everyone except when Ray Block was sent to cover the Daytona 500 and someone else drove his 30 and lost to a 62’ Pontiac. Is that car still around?
Also, I have an extra 3259s carburetor, but someone stripped it of some parts including the choke assembly, choke shaft, choke flap, choke linkage for high idol, and four meter rods. If I can rebuilt it for future needs down the road or help someone that needs a 3259s.
Jerry Lindsay
Seminole, FL
From: Chrysler300@xxxxxxxxxxxxxxx [mailto:Chrysler300@xxxxxxxxxxxxxxx] On Behalf Of 'Rich Barber' c300@xxxxxxx [Chrysler300]
Sent: Saturday, August 29, 2020 2:36 PM
To: 'royjrdaniel'; 'Chrysler 300 Club, Int'l'
Cc: '300-John Lazenby'
Subject: RE: [Chrysler300] 355 HP B's
Interesting. Thank you.
Rich B...
From: Chrysler300@xxxxxxxxxxxxxxx <Chrysler300@xxxxxxxxxxxxxxx> On Behalf Of royjrdaniel royjrdaniel@xxxxxxx [Chrysler300]
Sent: Saturday, August 29, 2020 11:22 AM
To: c300@xxxxxxx; 'Chrysler 300 Club, Int'l' <chrysler300@xxxxxxxxxxxxxxx>
Cc: '300-John Lazenby' <french_fryguy@xxxxxxxxx>
Subject: RE: [Chrysler300] 355 HP B's
29 made it to the market. 3 known to exist
Sent from my Verizon, Samsung Galaxy smartphone
-------- Original message --------
Date: 8/29/20 2:10 PM (GMT-05:00)
Subject: [Chrysler300] 355 HP B's
What do we know about the 355 HP 300-B hemi-engined cars? Did any make it to the civilian world? Has anyone converted a “standard” 300-B engine to the 355 HP spec’s? I recall that the 355’s had a higher compression ratio (11:1 ?). Different cam? Pistons, ignition? Anything else? Noted on the Car Record Cards?
Rich Barber
Brentwood CA
c300@xxxxxxx