[Chrysler300] 1962 Linkage Piece Needed
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Chrysler300] 1962 Linkage Piece Needed





You know the many, many pieces of linkage that play between the Carburetor, the Accelerator Pedal & down to the Transmission?

Well....
I need ONE piece!

- There's the bell crank that lives on the shaft at the transmission (I have that)
- That has a couple pieces that head UP the firewall (I have those)
- Off that bell crank is also a short rod that snaps ON to the lever coming out of the transmission (I NEED THAT PIECE)

The parts book image, calls it:
ROD 14-11-9

Anyone have one?
It snaps on to the ball at the end of the lever that lives on the transmission; near the shifter cable.
The rod that I DO have has a fixed 90 degree elbow that would slide into a hole on the lever,
My lever has a ball at the end; thus I need the Rod with the snap on end.
I can provide a picture of what I do need.

Thanks!
Matt Allyn


__._,_.___

Posted by: Matt Allyn <allynentertainment@xxxxxxxxx>


To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to https://groups.yahoo.com/neo/groups/all/manage/edit

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang




Visit Your Group
Yahoo! Groups
PrivacyUnsubscribeTerms of Use

__,_._,___


Home Back to the Home of the Forward Look Network Archive Sitemap


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.