[Chrysler300] Non- PB brake conversion for 4 speed K
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Chrysler300] Non- PB brake conversion for 4 speed K



Folks

I have a short ram Intake J/K setup I want to install on our 4 speed K. The cast iron headers are already on the car and I have the heat riser elbows and pretty much everything else to get this done with the exception of the remote PB booster et al. Many years ago I bought a manual brake setup (master, backing plate, brake pedal hanger assembly and brake pedal.) It was for a Torqueflite car, which at the time I didn’t think would be an issue. For me it was bust 

Well, now as we’re trying to do the conversion from PB to non-PB, it is an issue. Seems as though the geometry of the non PB plunger into the relocated non-PB master (which I had resleeved and restored by Midwest brake - I think that’s the name on our club site) won’t work. 

So here’s what I need : 

- a C-Body brake pedal hanger and pedal arm for a 3 speed stick manual 
(‘60- 64?) brake car (mostly impossible, unless a B-Body of early ‘60’s would work?)
- a complete remote power booster assembly, including the booster, master, (brake lines etc ?) Etc to Accommodate the rams .

I don’t know what the interchangeability is C-Body vs. B-Body but if B-Body parts would help considerably.

Thanks,

Keity 


------------------------------------
Posted by: Keith Langendorfer <keith_a_lang@xxxxxxxxx>
------------------------------------

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to https://groups.yahoo.com/neo/groups/all/manage/edit

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
------------------------------------

Yahoo Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Chrysler300/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/Chrysler300/join
    (Yahoo! ID required)

<*> To change settings via email:
    Chrysler300-digest@xxxxxxxxxxxxxxx 
    Chrysler300-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo Groups is subject to:
    https://info.yahoo.com/legal/us/yahoo/utos/terms/



Home Back to the Home of the Forward Look Network Archive Sitemap


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.