[Chrysler300] 300G sway bar bushings
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Chrysler300] 300G sway bar bushings





Has anyone replaced the factory sway bar bushings on a 300G?  Gary lists these in his catalog, and I’ve emailed Quirey about availability but have not yet heard back.  The only way I see to install these is to cut the welds on the sway bar, remove the old one, lube and slide the new one over the flat ends, reassemble and re-weld.  Sure would like to know if anyone else has replaced these and/or know a source to buy them.  I can’t imagine it would be easy to cut the welds, get them onto the bar and positioned, then reweld without damaging them.  Seems odd that Chrysler would design them so unserviceable, and evidently they were that way through 1965.

 

Bob J

 



__._,_.___

Posted by: "Bob Jasinski" <rpjasin@xxxxxxxxxxx>


To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to https://groups.yahoo.com/neo/groups/all/manage/edit

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang





__,_._,___


Home Back to the Home of the Forward Look Network Archive Sitemap


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.