Re: [Chrysler300] Some stuff I could use
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Chrysler300] Some stuff I could use

On 6/29/2020 8:25 PM, John Grady jkg@xxxxxxxxxxxxxxxxx [Chrysler300] wrote:

> Finally, have had many failures and erratic operation of vacuum
> starter interlock switch on 57-58. Anyone solve this ?Most vacuum
> electric switches seem wrong range - and “NOS “, if you can find,
> seem failure prone. ( fail open, = no start )Harley uses one, I see
> on net, not sure what for, might work. comments welcome. Sincere
> thanks, John

> Sent from my iPhone not by choice

Back in the 70's when my C was almost a daily driver I considered the
failing vacuum switch as an 'anti-theft' measure.

I kept a bent to fit paperclip in the glove box for those occasions.
Pop the hood, insert paperclip firmly in the insulators for the end
terminals and then start 'er up.  Remove paperclip, drop hood and away
I'd Go!

Paul Holmgren
JCI #74145
To announce that there must be NO criticism of the President, or that
we are to stand by the President Right or Wrong, is not only UNPATRIOTIC
and SERVILE, but is Morally TREASONABLE to the American Public.
   Former Republican President, Theodore Roosevelt

Posted by: paul <paulholm@xxxxxxxxxxxxx>

To send a message to this group, send an email to:

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to

For list server instructions, go to

For archives go to

Yahoo Groups Links

<*> To visit your group on the web, go to:

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    (Yahoo! ID required)

<*> To change settings via email:

<*> To unsubscribe from this group, send an email to:

<*> Your use of Yahoo Groups is subject to:

Home Back to the Home of the Forward Look Network Archive Sitemap

Copyright 2018 The Forward Look Network.  All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.