Good experience with steer and gear but slow , delays last time, and sort of disorganized . Results / work excellent.
Had a hassle with Lares , 600 to rebuild a 57 ps pump?? ( solid gold?) had them send it back . Nothing you can do to a ps pump worth 600. Put in GM Saginaw pump instead . Made brackets .There is available a custom outlet fitting / regulator that puts out 800 on that Saginaw pump . ( normally 1000) sold to use with mustang rack , often in hot rods . Saginaw pump is bulletproof . 800 psi is for pre 59 300 coaxial ps box . S and G rebuilt several of those for me — not easy . All was good . Brand new Saginaw pump is under 100$.. Small too — fit in front of 392 motor mount ok , need custom hose . Easy .I still use S and G due to results . Many F boxes . Can firm up box feel a little if you ask . Drip at output pitman shaft is common problem . Gone after rebuild .JSent from my iPhone not by choice
On 7 Jun 2020, at 10:00 pm, Matt Allyn allynentertainment@xxxxxxxxx [Chrysler300] <Chrysler300-noreply@xxxxxxxxxxxxxxx> wrote:Planning to send out for rebuild; for both our Sport & the H..Yell if you have any pro's or con's for either of these places:ORThanks!Matt Allyn
__._,_.___
Posted by: Loren Nelson <lorenhelenn@xxxxxxxxx>
To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx
To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to https://groups.yahoo.com/neo/groups/all/manage/edit
For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang