|
From the AMA Consolidated Spec Questionnaire, dated 2-15-55 (“C-300 added”): Caster: Minus 2 degrees to 0 degrees, with 0 degrees preferred for cars with power steering Camber: ¼ degree, plus/minus 3/8 degrees, preferred: left side +1/2 degree, right side 0 degrees Toe In: 0 to 1/16 inches, 0 preferred As been pointed out by others, these values are for cars with diagonal tires. Running radials would give some slightly other values, but a competent shop should be able to interpolate those from the stock values? Narve in Norway Fra: Chrysler300@xxxxxxxxxxxxxxx [mailto:Chrysler300@xxxxxxxxxxxxxxx] På vegne av gbm@xxxxxxx [Chrysler300] Hi I am going to take my 55 to the local alignment shop. Does anyone have a source for or the alignment procedure and specs.? I told the manager I would try to get them. It's not in my manual except for a procedure using chrysler fixtures and no caster, camber, or toe specs. Thank You Dan __._,_.___ Posted by: "Narve Nordanger" <flathead323@xxxxxxxxx> To send a message to this group, send an email to: Chrysler300@xxxxxxxxxxxxxxx To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or go to https://groups.yahoo.com/neo/groups/all/manage/edit For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang __,_._,___ |
Back to the Home of the Forward Look Network
Archive Sitemap