Strut bars for sway bars have a square section to bolt the bar clamp to.
Non sway bars are round the whole length.
Don
Sent: Saturday, May 16, 2020 9:29 AM
To: Peter Pellicani
Subject: Re: [Chrysler300] torsion bars and sway bars 300
K Struts have no role in handling in the sense once they locate the control arm
against forward impacts and to hold alignment their job is done , thick or thin
( unlike torsion bars or sway bars ) . They are only loaded axially . But
in process of changing those , new rubber bushings and realignment = May bring
significant improvements . But cannot be connected to bar thickness . Just
sayin Sent from my iPhone not by choice
On 16 May 2020, at 9:16 am, Peter Pellicani pellicaniaerosvc@xxxxxxxxx [Chrysler300] <Chrysler300-noreply@xxxxxxxxxxxxxxx> wrote:
__._,_.___ Posted by: <dverity@xxxxxxxxxxx> To send a message to this group, send an email to: Chrysler300@xxxxxxxxxxxxxxx To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or go to https://groups.yahoo.com/neo/groups/all/manage/edit For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang __,_._,___ |