[Chrysler300] 300 K motor mounts
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Chrysler300] 300 K motor mounts





Thanks again, Bob Merritt for the pointer to check the motor mounts regarding my trouble removing the oil pan.

LH mount broke and sunk, RH is cracked on both sides. Plan L begins!

Can I ask for advice and comments as to rebuilding with Then and Now, or has anyone used any of the urethane repops?

Might anyone have some cores I could send if need to Then and Now be to hasten turn around time? I will send you mine to replace them. I would rather not leave the motor suspended for weeks on the lifts' cylinder alone.

Onward!

Al


__._,_.___

Posted by: ALLAN POZDOL <apozdol@xxxxxxxxxxx>


To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to https://groups.yahoo.com/neo/groups/all/manage/edit

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang




Visit Your Group
Yahoo! Groups
PrivacyUnsubscribeTerms of Use

__,_._,___


Home Back to the Home of the Forward Look Network Archive Sitemap


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.