Re: [Chrysler300] 300 K trim clips
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Chrysler300] 300 K trim clips


Thanks for that. I had a catalog from the late '70's but tossed it years ago.

I guess I am hoping that this clip was used on other MOPAR cars, as the A,B and E body cars seem to enjoy a better repop market. Chrysler used a lot of parts across the lines back then.

The PO of my car must have hit something along the sill, my clips are all shattered.

On March 22, 2020 at 12:44 PM "John Lazenby french_fryguy@xxxxxxxxx [Chrysler300]" <Chrysler300-noreply@xxxxxxxxxxxxxxx> wrote:




I have a 1983-84 AUVECO catalog as I use to sell their products prior to retiring.  In my research of Chrysler items and looking through the general area I can't come up with the part # you provide.

Sorry I couldn't help more,

John Lazenby

On Sunday, March 22, 2020, 10:15:21 AM PDT, ALLAN POZDOL apozdol@xxxxxxxxxxx [Chrysler300] <chrysler300-noreply@xxxxxxxxxxxxxxx> wrote:



Has anyone sourced a replacement for the thinner 300 sill molding clips? I find part number 6001 605 in the parts book. Nothing is coming up on web searches nor anything coming up in the cross reference book..

Does anyone have an older printed Auveco catalog around where we might get their part number from?

300 K




Posted by: ALLAN POZDOL <apozdol@xxxxxxxxxxx>

To send a message to this group, send an email to:

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to

For list server instructions, go to

For archives go to

Visit Your Group
Yahoo! Groups
PrivacyUnsubscribeTerms of Use


Home Back to the Home of the Forward Look Network Archive Sitemap

Copyright 2018 The Forward Look Network.  All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.