[Chrysler300] 1957 Rear axle casting nr
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Chrysler300] 1957 Rear axle casting nr

 Just back from down under my 300c conv, now looking for inputs about my rear axle.. Any idea on this setup? mid section has the cross cast on the passanger side  On flat area center section passanger side we read  stamped 3:15
 Driver side casting reads  .4.   (A)  in an circle and cast nr reads 1820657.
 Any idea if this is the original or not?  my tranny was not,  was an 58service R tranny...has had a go on and off several times..
 Not anything on bolts fastners etc tells rear end has been out of car before,, any idea?
 Thanks //2x300c


Posted by: wa355rxet6fjmnj7hrejj254w6xpxomgc2lcmtme@xxxxxxxxx

To send a message to this group, send an email to:

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to https://groups.yahoo.com/neo/groups/all/manage/edit

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang

Yahoo Groups Links

<*> To visit your group on the web, go to:

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    (Yahoo! ID required)

<*> To change settings via email:

<*> To unsubscribe from this group, send an email to:

<*> Your use of Yahoo Groups is subject to:

Home Back to the Home of the Forward Look Network Archive Sitemap

Copyright 2018 The Forward Look Network.  All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.