Re: [Chrysler300] 1960 "F" Generator
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Chrysler300] 1960 "F" Generator





I have used Don Allen, the Generator guy you mention, with great results.  But the last I knew he cannot convert a generator that drives a PS pump.  That rules out C-300s and I don’t know what else.

On Aug 31, 2019, at 10:50 AM, Tony Rinaldi awrdoc@xxxxxxxxx [Chrysler300] <Chrysler300-noreply@xxxxxxxxxxxxxxx> wrote:

1960 Valiants had alternators. 


I finally found the outfit that puts an alternator into original generator cases. 

https://www.gener-nator.com/orders.htm 



Sent from Yahoo Mail for iPhone

On Saturday, August 31, 2019, 10:08 AM, Val Jeffers edward1108@xxxxxxxxx [Chrysler300] <Chrysler300-noreply@xxxxxxxxxxxxxxx> wrote:

 

The only 300 F’s that had an alternator were the 7 or so 4 Speeds that were built. Also, I may be wrong, but I’m thinking the 1960 Plymouth Valiants had an alternator. 

                     Val J 


Sent from Yahoo Mail for iPhone

On Saturday, August 31, 2019, 9:38 AM, Dan300f dan300f@xxxxxxx [Chrysler300] <Chrysler300-noreply@xxxxxxxxxxxxxxx> wrote:

 

Mike,

I don't know what the defintion of "near the end" is but my F was among the last 10 or so produced and it came with a generator.

Dan Reitz

________________________________________________________________________________

In a message dated 8/31/2019 3:54:33 AM Pacific Standard Time, Chrysler300-noreply@xxxxxxxxxxxxxxx writes:



The generator/alternator shop says the armature on my F's generator is shot - shorted out. Unrepairable. Do any of you have a source for a generator, or a generator for sale?

Second question: the shop says F's manufactured late in the prouction year had alternators installed. I've never heard that - any truth to it?

Mike
Women with a little extra weight tend to live longer than men who mention it.

On Aug 29, 2019, "rob bohuslav sonoramic413@xxxxxxxxx [Chrysler300]" <Chrysler300-noreply@xxxxxxxxxxxxxxx> wrote:
 
 

On Thu, Aug 29, 2019 at 4:20 PM rob bohuslav <sonoramic413@xxxxxxxxx> wrote:
Viscous fans only limit how fast the fan spins in relation to engine RPM...... There are Thermostatically controlled viscous fans which also "lock up" or "tighten up" the drive of the fan related to temp. If the fan clutch has a spring in the center of it, its a thermostatically controlled fan. If not, its only a viscous fan. If a fan clutch goes bad, typically it will appear to be real loose, and may even appear to not spin in relation to the engine, if at all, at idle.. If the fan "freewheels" and has very little if any resistance (engine off of course)...... the clutch is probably bad. 

On Thu, Aug 29, 2019 at 2:10 PM williamgrogan2002@xxxxxxxxx [Chrysler300] <Chrysler300-noreply@xxxxxxxxxxxxxxx> wrote:
 
 

Do I understand correctly that once the engine is hot the fan should become more difficult to spin as the fluid inside the clutch becomes more viscous?  Seems like mine stays rather easy to spin when stone cold or after running for some time.  Asking because the car seems to run warmer than it used to (not hot, just warmer).

 

Bill

Just east of the Gateway Arch.











__._,_.___

Posted by: Charles Schoendorf <cschoend@xxxxxxxxxxxxx>


To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to https://groups.yahoo.com/neo/groups/all/manage/edit

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang





__,_._,___


Home Back to the Home of the Forward Look Network Archive Sitemap


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.