RE: [Chrysler300] Gaskets
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: [Chrysler300] Gaskets


I do not think anything goes particularly wrong with those, mostly they get lost or are thrown away. I think it is there,  as anti rattle idea ---and to stop light leaks around buttons. Many of my cars have shown up without them. So I agree, Noel, ----It ought to be an item with some volume for Quirey….


The factory felt is thicker than most of what you can buy….and it really needs to be die cut..a poor fit will still let light through if you try to make it. Not easy to do either, by hand.




From: Chrysler300@xxxxxxxxxxxxxxx [mailto:Chrysler300@xxxxxxxxxxxxxxx] On Behalf Of Noel Hastalis cpaviper@xxxxxxxxxxx [Chrysler300]
Sent: Wednesday, June 05, 2019 11:06 AM
To: Marshall Larson; Marshall Larson granitledge@xxxxxxxxx [Chrysler300]; 300
Subject: Re: [Chrysler300] Gaskets


Marshall & Group -

I looked back at my orders from Gary, and saw in my 11/22/2010 order that I asked him for these felt shields, but had no part number. He did mail them to me, but I agree with you that they're not shown in his catalog.


On June 5, 2019 at 9:15 AM "Marshall Larson granitledge@xxxxxxxxx [Chrysler300]" <Chrysler300-noreply@xxxxxxxxxxxxxxx> wrote:



I had checked with Quirey and they don't have them.  I didn't see them in Gary's catalog either.  I am aware that I can make them and Quirey offered to make them if I send a sample.  Is there enough demand to do a run?



Marshall Larson





Posted by: "John Grady" <jkg@xxxxxxxxxxxxxxxxx>

To send a message to this group, send an email to:

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to

For list server instructions, go to

For archives go to


Home Back to the Home of the Forward Look Network Archive Sitemap

Copyright 2018 The Forward Look Network.  All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.