Re: [Chrysler300] 1964 K convert
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Chrysler300] 1964 K convert





The top and side trim pieces are held on with screws, only the bottom piece is held on with clips. Unless your car saw lots of rain and/or salt, they should be reusable. If not they are listed in Gary Goers catalog so Quirey Quality Design who bought Gary's business should have them.
Murray Park in Ohio should have good used ones too.
Jean-Yves Chouinard.


From: Chrysler300@xxxxxxxxxxxxxxx <Chrysler300@xxxxxxxxxxxxxxx> on behalf of Harry Torgeson torg66@xxxxxxxxx [Chrysler300] <Chrysler300-noreply@xxxxxxxxxxxxxxx>
Sent: April 29, 2019 9:47 PM
To: Chrysler 300 List
Subject: [Chrysler300] 1964 K convert
 
 

I'm thinking about removing my stainless steel windshield trim for polishing, will have body shop remove it, my question is will the clips break and are they replaceable from who?
Thanks for



__._,_.___

Posted by: Jean-Yves Chouinard <jymopar@xxxxxxxxxxx>


To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to https://groups.yahoo.com/neo/groups/all/manage/edit

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang





__,_._,___


Home Back to the Home of the Forward Look Network Archive Sitemap


Copyright 2018 The Forward Look Network.  All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.