Re: [Chrysler300] 300E starting issue .................................................................................

["Dan300f dan300f@xxxxxxx [Chrysler300]" <Chrysler300-noreply@xxxxxxxxxxxxxxx>]

Hi Tom:

In the past I've had similar problems with my F.  Turned out that the contact plate in the starter solenoid was corroded.  Simple fix to take it out, reverse it and reinstall.  Now no more clicks, starts every time.  Thanks to several good 300 buddies with the solution.  Good luck.

Dan Reitz

Bell Canyon, CA

In a message dated 1/22/2019 7:28:32 AM Pacific Standard Time, Chrysler300-noreply@xxxxxxxxxxxxxxx writes:

Good Day to Everyone in 300Land!

Went out, put the key into the ignition and nothing!  Battery is fine, but I hear a very faint click and nothing.  So, I'm thinking, voltage regulator, ignition coil, starter or starter solenoid.  No past problems - has always started right up!  Any thoughts?  And, thanks in advance for any and all responses!

Tom

Miami, Florida

__._,_.___

---

Posted by: Dan300f <dan300f@xxxxxxx>

---

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to https://groups.yahoo.com/neo/groups/all/manage/edit

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang

Visit Your Group

• Privacy • Unsubscribe • Terms of Use

__,_._,___