Re: [Chrysler300] 61 300 G
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Chrysler300] 61 300 G





The tag mounting hardware is available in the Help aisle in most parts stores.
Kit with 2/3  nylon inserts and screws which when screwed in to hold the tag spread the inserts to lock them in the holes.
Ray

On Tue, Sep 11, 2018 at 8:22 PM Scooter465@xxxxxxx [Chrysler300] <Chrysler300-noreply@xxxxxxxxxxxxxxx> wrote:
 

Two lower holes normally have a nylon insert pressed in. Screw

Goes in to inserts. Top hole has a rubber bumper just to prevent plate rattling.

Sent from my iPhone

On Sep 11, 2018, at 5:50 PM, Val Jeffers edward1108@xxxxxxxxx [Chrysler300] <Chrysler300-noreply@xxxxxxxxxxxxxxx> wrote:

 

   Greetings all,

                    I have possibly a dumb question but I won't let that stop me ! On the front bumper, are there plastic inserts for attaching a license plate or do you simply use a bolt and nut ?

                                                                                                         Thanks,

                                                                                                         Val Jeffers



--
Ray Jones. Y'all come on down an see us. Ya hear?


__._,_.___

Posted by: Ray Jones <1970hurst@xxxxxxxxx>


To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to https://groups.yahoo.com/neo/groups/all/manage/edit

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang




Visit Your Group
Yahoo! Groups
PrivacyUnsubscribeTerms of Use

__,_._,___


Home Back to the Home of the Forward Look Network Archive Sitemap


Copyright 2018 The Forward Look Network.  All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.