Re: [Chrysler300] 1960 Steering gear box
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Chrysler300] 1960 Steering gear box





Thanks for all the info/suggestions on the 1960 steering box question.   A friend with a '60 New Yorker 4 door asked if I had every had one out and how hard it would be to do.  I had no idea so asked the club.  I'll pass along all the information to him.  

I haven't drive the new F enough to know if it needs it.  From the answers you all gave I certainly hope not.

On Tue, Aug 28, 2018 at 5:21 PM, Keith Boonstra <kboonstra@xxxxxxxxxxxx> wrote:
It's going to be pretty easy if the engine is out of the way. If not, maybe a little more work to wiggle it out. 

On our '57 my mechanic was able to ease it out and shoehorn it back in without scratching either the engine or the inner fender. His bill totaled $375 all in including the steering column work. It's also possible that the '60 may be a little more work.

Good luck.

Keith Boonstra

-

On Mon, Aug 27, 2018 at 10:20 PM, Mick Kreszock kreszockcm@xxxxxxxxxxxx [Chrysler300] <Chrysler300-noreply@yahoogroups.com> wrote:
 

How difficult is it to remove and replace the steering gear box in a 1960 Chrysler?





__._,_.___

Posted by: Mick Kreszock <kreszockcm@xxxxxxxxxxxx>


To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to https://groups.yahoo.com/neo/groups/all/manage/edit

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang




Visit Your Group
Yahoo! Groups
PrivacyUnsubscribeTerms of Use

__,_._,___


Home Back to the Home of the Forward Look Network Archive Sitemap


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.