Re: [Chrysler300] 300G Heater Hose Routing

["dverity@xxxxxxxxxxx [Chrysler300]" <Chrysler300-noreply@xxxxxxxxxxxxxxx>]

My 300 G bought from the estate of the original owner did not have the copper pipes. There are plenty of them that did not have them. Like Andy said, no particular pattern, like the “300” trunk numbers.

Don

 

From: mailto:Chrysler300-noreply@xxxxxxxxxxxxxxx

Sent: Friday, August 17, 2018 8:09 PM

To: Chrysler 300 List ; Val Jeffers

Subject: Re: [Chrysler300] 300G Heater Hose Routing

 

 

I haven't seen any 300G without the copper heater lines, except the models with the rams in the trunk.

---

From: Chrysler300@xxxxxxxxxxxxxxx <Chrysler300@xxxxxxxxxxxxxxx> on behalf of Val Jeffers edward1108@xxxxxxxxx [Chrysler300] <Chrysler300-noreply@xxxxxxxxxxxxxxx>
Sent: Friday, August 17, 2018 4:54 PM
To: Chrysler 300 List
Subject: [Chrysler300] 300G Heater Hose Routing

 

 

    Greetings all,

                          I have noticed several 300 G's that have the above laying across the top of the Ram Manifolds. I'm sure this is incorrect as they should be ran as copper tubing under the manifolds. Mine are copper under the manifolds.  Thoughts ?

                                                                                                       

                                                           Thanks,

 

                                                           Val J

__._,_.___

---

Posted by: <dverity@xxxxxxxxxxx>

---

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to https://groups.yahoo.com/neo/groups/all/manage/edit

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang

Visit Your Group

• Privacy • Unsubscribe • Terms of Use

__,_._,___