RE: [Chrysler300] High torque mini starter
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: [Chrysler300] High torque mini starter





I recently installed a HiTorque brand gear- reduction starter in my '60 300F...it should be the same for 300G...it is part number IMI- 126- 001 and has the correct bolt pattern, depth and number of teeth on the drive. It was $225.00 plus about $13.00 shipping. I got mine directly from the maker: IMI Performance Products in Whittier, Ca. It is best to do that, so you get the correct one- don't bother trying to save the $10 by buying from resellers....all the resellers seem to only sell the 126-002, which is the wrong one. The only thing I needed to do, and they advised me of this, was to grind a little bit off of the flange in one small place to fit in the bell housing....no biggie. Yes, it sounds different cranking, but it takes the big current draw off the battery, and the big stress off of me when she has been sitting for a spell and there is no gas up in the carbs!...or when the engine is hot and the(old) starter seems to be just jammed/ frozen and refuses to turn! ...I have a rebuilt factory starter if I ever need a Concours Judging(which will be no time soon!). I also got some spare relay connectors with the wires attached just in case I buggered the one that came in the box, but haven't needed any yet(to go back to factory). I also changed my trans cooling lines( with stainless ones from Classic Tube) while under the car, and that made the starter even easier to change. Get one of these starters and you will be happy.

John Kuegel, 300F in Long Island, NY




On Fri, Aug 10, 2018 at 9:05 PM, 'Tony Bevacqua' tonysru2@xxxxxxxxxxx [Chrysler300]
<Chrysler300-noreply@xxxxxxxxxxxxxxx> wrote:
 

I purchased one for my ’57 directly from them last month.  No problem, and great service.  Tony

 

From: Chrysler300@xxxxxxxxxxxxxxx <Chrysler300@xxxxxxxxxxxxxxx> On Behalf Of Tony Rinaldi awrdoc@xxxxxxxxx [Chrysler300]
Sent: Friday, August 10, 2018 5:36 PM
To: Scooter465@xxxxxxx; Travis Baker <travisbaker4@xxxxxxxxx>
Cc: Chrysler300 <Chrysler300@xxxxxxxxxxxxxxx>
Subject: Re: [Chrysler300] High torque mini starter

 

 

Years ago I worked with Roadrunner Starters and they worked on my Chrysler 300-F. 

 

Check this link out and be sure to communicate with them before you buy one from down under. 

 

They used to have a US stocking distributor. 

 

 

Tony Rinaldi



Sent from Yahoo Mail for iPhone

On Friday, August 10, 2018, 8:19 PM, Scooter465@xxxxxxx [Chrysler300] <Chrysler300-noreply@xxxxxxxxxxxxxxx> wrote:

 

Will only fit 1962 or newer with aluminum torgueflite transmissions.

Bob Haag

Sent from my iPhone


On Aug 10, 2018, at 7:54 PM, Travis Baker travisbaker4@xxxxxxxxx [Chrysler300] <Chrysler300-noreply@xxxxxxxxxxxxxxx> wrote:

 

Hello,

 

Has anyone used a high torque mini starter in their 1961 300?

 

Thanks,

 

Travis



__._,_.___

Posted by: John Kuegel <jwkco@xxxxxxxxx>


To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to https://groups.yahoo.com/neo/groups/all/manage/edit

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang




Visit Your Group
Yahoo! Groups
PrivacyUnsubscribeTerms of Use

__,_._,___


Home Back to the Home of the Forward Look Network Archive Sitemap


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.