Gary’s Catalog http://www.garygoers.com/ (Scroll down to links for the catalog and price list) lists the Console inserts twice. On page 4 as for ’60-’62 Letter Car without a part #--polished and anodized-$300. And again, on Page 6 as for ’55-’56—pretty obviously a typo as the price is the same $300 for the complete set-F&R for the ’60-’62. These are die-cut so will not fit ’63-’64 consoles. Part #676. As it appears the process for duplicating the inserts is known, another good project has identified itself. Rich Barber Brentwood, CA From: Chrysler300@xxxxxxxxxxxxxxx <Chrysler300@xxxxxxxxxxxxxxx> On Behalf Of 'Fern Rivard' crc@xxxxxxxxxxxx [Chrysler300] If it’s the same stuff as used on the 300F, 300G and 300H on top of the consoles then Gary Goers had those in stock. Fern Sent: Sunday, June 24, 2018 12:36 PM Subject: Re: [Chrysler300] POLISHED ALUMINUM CONSOLE PIECES Dave mine were always too pitted to do anything with. I got thin aluminum flashing and "recovered" mine. Hope this helps. Mike Laiserin On June 24, 2018 11:25:42 AM MST, "Dave Dumais dave.dumais@xxxxxxxxx [Chrysler300]" <Chrysler300-noreply@xxxxxxxxxxxxxxx> wrote:
__._,_.___ Posted by: "Rich Barber" <c300@xxxxxxx> To send a message to this group, send an email to: Chrysler300@xxxxxxxxxxxxxxx To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or go to https://groups.yahoo.com/neo/groups/all/manage/edit For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang __,_._,___ |