Re: [Chrysler300] 1955 Chrysler/Desoto Trunk Weatherstrip
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Chrysler300] 1955 Chrysler/Desoto Trunk Weatherstrip

Steele products are probably the best in the industry from my experiences.  Bottom line, do it once do it right and even though you may think it expensive in the long run you will be ahead.

John Lazenby

On Friday, February 9, 2018, 3:53:37 PM PST, Joe Allen billandmarilynallen@xxxxxxxxx [Chrysler300] <Chrysler300-noreply@xxxxxxxxxxxxxxx> wrote:


Yes, the Steele item is expense but it fits very nicely.  After many years of dealing with a poor fitting seal, it is great having a seal that fits perfectly on my 55 C300.

Good luck!

Bill Allen 

On Feb 8, 2018 1:59 PM, "'Ron Waters' ronbo97@xxxxxxxxxxx [Chrysler300]" <Chrysler300-noreply@xxxxxxxxxxxxxxx> wrote:

Hey Everyone -
Any advice on trunk weatherstrip for 55 Chrysler/Desoto ? All the repro stuff out there doesn't look like the original. Steele's weatherstrip would probably work, but the $89 price is a bit steep. Would love to find some good original (square-ish foam piece with thin rubber topping).


Posted by: John Lazenby <french_fryguy@xxxxxxxxx>

To send a message to this group, send an email to:

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to

For list server instructions, go to

For archives go to


Home Back to the Home of the Forward Look Network Archive Sitemap

Copyright 2018 The Forward Look Network.  All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.