Re: [Chrysler300] 413 Welch plugs
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Chrysler300] 413 Welch plugs





Not sure why you want to use disc rather than cup plugs. Cup plugs are more foolproof, and are easier to set and keep in place.
Back in the day when I replaced any of mine, I used Marine Brass cup plugs.
413 is a very popular engine, so they should be readily available, in steal or Brass.

On Fri, Oct 20, 2017 at 3:47 PM, 'Richard Vitek' rpvitek@xxxxxxxxxxxxx [Chrysler300] <Chrysler300-noreply@xxxxxxxxxxxxxxx> wrote:
 

Anyone know of a  good source for Welch plugs (expansion/freeze/core),( disc, not cup type,) for an early 413? Counterman at NAPA and some other stores unable to help. Thanks.

 

By the way, are these sized nominally the same as the cup type for the same size bores?




--
Ray Jones. Y'all come on down an see us. Ya hear?


__._,_.___

Posted by: Ray Jones <1970hurst@xxxxxxxxx>


To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to https://groups.yahoo.com/neo/groups/all/manage/edit

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang




Visit Your Group
Yahoo! Groups
PrivacyUnsubscribeTerms of Use

__,_._,___


Home Back to the Home of the Forward Look Network Archive Sitemap


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.