Re: [Chrysler300] 61 300G

I have the Toyo tires on my G. Also have had Toyo tires on a daily driver in the past and very happy with them. I think it is a Japanese company

Sent from my iPhone

On Aug 31, 2017, at 3:11 PM, Val Jeffers <edward1108@xxxxxxxxx> wrote:

Spoke with James at Diamond Back this afternoon and he stated 235!75 R15 was the correct size for a G. He advised of brands: Nexin & Toyo. Never heard of either one. I suppose they are made by a major company?
Thanks,

Val J

Sent from Yahoo Mail for iPhone

On Tuesday, August 29, 2017, 8:15 PM, Mick Kreszock kreszockcm@xxxxxxxxxxxx [Chrysler300] <Chrysler300-noreply@xxxxxxxxxxxxxxx> wrote:

I second Michael. My Diamondbacks are for superior to the Cokers I took off.

On Mon, Aug 28, 2017 at 8:10 PM, Michael Falcone mjf175@xxxxxxx [Chrysler300] <Chrysler300-noreply@xxxxxxxxxxxxxxx> wrote:

I have Diamond Back DB2 radials 235/75/R15 with a 3" white wall, same size whitewall as original tires. If you want the original look of bias ply tires then they offer those too. If you plan on driving the car I would go with the radials, I am very pleased with mine. They usually have a holiday sale with $50 off each tire if you can wait till December

-----Original Message-----
From: EMills_ATC millserat@xxxxxxxxxxxxx [Chrysler300] <Chrysler300-noreply@ yahoogroups.com>
To: Michael Ashmore <michael.ashmore@xxxxxxx>; Chrysler 300 Club Int. Server <chrysler300@xxxxxxxxxxxxxxx>
Sent: Sat, Aug 26, 2017 11:40 pm
Subject: Re: [Chrysler300] 61 300G

8.00-15 nominal diameter 29.3 to 29.7 inches (variability by brand back then).

I think Coker now has some 8.00R15 vintage looking whitewalls not sure sidewall width, but 1961 was last of the wide whitewalls and they had gotten progressively narrower by year til they went to narrow white in 1962. There may be some better experts here, but as first responder, I would guess about 3 inches - not much wider.

225/70R15 (nominally 27.4 inch OD) equated to G70-15 or in your vintage 7.10-15.

227/75R15 (28.3 OD) H78-15 or roughly 7.60-15; 235/70R15 (27.9 OD) H70-15 (same load as 225/75R15 or H78-15)

235/75R15 (28.9 OD) J78-15 or roughly 8.00-15 - still slightly smaller OD and radials even at higher pressure will have lower static loaded radius (shorter sidewall with more bulge at bottom).

Best, Ed

Edward Mills Antique Tractors 1930-1960 Antique Cars 1960-1985

On 8/26/2017 9:47 PM, 'Michael Ashmore' michael.ashmore@xxxxxxx [Chrysler300] wrote:

Hi All,

Now that I've sold my 61 Corvette my 61 300G gets all the attention!

Questions

1. What width size whitewall did the 300G come with? I'm planning on buying Coker radials, The stock size was 8.00 - 15. Would that equate to 225 70R-15?

2. I also need to do the brakes from stem to stern. I was going to use NAPA for most of the parts. Comments? Recommendations? Has anyone used s/s brake lines from Good Brakes or Brake Hoses Unlimited on EBay?

Thanks,

Mike 300G Barn Find